Fieldwork preparations

By Lou, Marie, Shunan and Ate 
 

Over the last months, we have been busy preparing for this year’s fieldwork, and with that our activities shifted from science to more practical things. Practical things that might be less fun, but certainly not less important than the science we need to do in the field! 

The chance of us meeting a polar bear is very slim, but to prepare for the unlikely the event of one visiting our camp, we needed to complete a rifle training. We had a first theory course during which we learned about analyzing a polar bear's attitude and the subsequent behavior we should have towards the bear. In most cases, polar bears can be scared away and they do not need to be shot. However, it can happen that they are really hungry or protecting their cubs so they adopt an aggressive behavior, and this is why we got a second practical training. We arrived on the shooting range where six printed polar bears were staring back at us. We all learned how to securely manipulate the rifle (always directing at the targets or up in the air), how to load and unload the rifle (Greenlandic half-loading specifically) and how to shoot in different positions from 25 and 50 meters. We all had a really different experience with this shooting training, but we all had in mind that we were about to use highly dangerous tools that hopefully we would not need to use in real life. The shooting range was itself quite impressive, as it is an isolated place with constant shooting noises, and so were the guns as they make noise, they are heavy, and recoil upon firing. The instructor then put us in a stress-situation, where we had to run to the car parking and back and shoot as quickly as possible. Some guns had been sabotaged by the instructor who wanted to test our ability to stay calm, and we all managed to hit the target in time. In the end of the day we left 6 incapacitated polar bear posters behind, and brought home some nervously and emotionally exhausted PhD students. 

We then had first aid training, focusing on the Arctic as it is an isolated place with specificities, e.g. it is impossible to call 112 in case of someone feeling bad there. It was more relaxed than the previous training and nice to try to give CPR to the “little Anne” doll. It was surprising how deep you actually have to press for it to work! And it was a reassuring and empowering experience for all of us that we all know how to perform first aid. 

 

Many hours of work involved getting all of our stuff – which was a surprisingly a huge amount – from the UK and Germany to Denmark and onwards to Greenland. Most of us made daily trips to the basement where more and more packages arrived every day. Steadily our offices became a warehouse filled with cardboard boxes and bubble wrap which were then replaced by plastic boxes as we repacked all of it to fit onto the pallets to then go in a container. 

Eventually the actual warehouse was mostly occupied with Deep Purple materials… Pallet after pallet of consumables, tents, sleeping bags, camping gear, food. Speaking of food, a combined effort made sure that we got some of the most important items included in our inventory. Without (real) coffee, parmigiano, chocolate, etc., certain colleagues just wouldn’t function on the ice. 

More practical jobs followed, like modifying tents, weighing all boxes, packing all boxes on pallets, moving pallets, re-packing them again. Most of us became very proficient with moving pallets around, and the warehouse looked more like a game of tetris. In fact, some of us started dreaming about pallet positions… Two of us also went on a road trip to Aalborg with a van full of chemicals (made it just in time for the boat!). Last but not least, lab tents arrived that had to be set up as a test. After weekends and evenings spent, a full shipping container was finally ready in time to go to Greenland.

In parallel to the packaging tasks is the drone experiment conducted by Ate and Shunan with the help of Lasse. The drone is a DJI M600 Pro and has a payload of 6 kg and will carry the hyperspectral camera on it. The test consisted of several steps. First we practiced our skills in drone simulator. After crashing enough simulated drones, we finally came to the stage of flying the real one. We tested the both the manual and autopilot flight mode. We designed one flight mission to draw a “DP” on the map. Having got the flying part ready, we mounted the gimbal stabilizer on the drone. It will help stabilize the onboard instrument while flying. Eventually the drone is equipped with a hyperspectral camera and a LiDAR onboard. 

We could almost forget that there are still experiments to do, so after the container left for shipping, it was back to polishing protocols, last-minute ordering and waiting anxiously for the last things to arrive. Departure is now fast approaching. Some think there’s too little time, while at the same time it cannot happen soon enough. The massive operation that needed so much preparation is now becoming real! Which still feels a bit unreal. And we’re all looking forward to meet each other on the ice after many online meetings across borders. In the end it was very hyggelig to work long hours in the warehouse together, and we will definitely keep up this work spirit on the ice!